home *** CD-ROM | disk | FTP | other *** search
- Path: news.eunet.fi!newsmaster
- From: kp@direktor.voima.jkl.fi (Kari-Pekka Koljonen)
- Newsgroups: comp.sys.amiga.hardware
- Subject: Re: CTX Multiscan Monitor
- Date: 2 Jan 1996 19:23:53 GMT
- Message-ID: <1346.6575T979T570@direktor.voima.jkl.fi>
- References: <820.6573T707T2161@teleplex.net> <19951231.1197D20.A7FC@olympus.net>
- NNTP-Posting-Host: direktor.voima.jkl.fi
- X-Newsreader: THOR 2.22 (Amiga;TCP/IP) *UNREGISTERED*
-
- >Mike Schaper (mschaper@teleplex.net) wrote:
- >:
- >: I have an Amiga 4000/040 with a CTX Multiscan monitor. I have had this
- >: computer for around 2 years now and I run my workbench in DBLNTSC. I never
- >: could get the monitor drivers to take up the full screen. I still have
- >: about an inch on the right and inch on the left of a border. I was just
- >: wondering if there is any way to get the full screen to be used. I have
- >: all the 3.1 monitor drivers and I have tried all those patches and have
- >: even tried that moned program. I was told when I originally bought my 4000
- >: that better drivers would be out to fix the problem but I still have the
- >: same problem.
-
- I have exactly the same problem. My configuration is: A1200/030/28MHz,
- 2+4M memory, Eizo Flexscan 8060S monitor (15-35kHz). The black sideborders
- appear in Euro72:Productivity (which I usually use) as well as in DBLNTSC.
- The drivers are version 40.4 and I don't use any parameters in tooltypes.
-
- Though the problem is not very very annoying, I'd still like to get a full
- screen display. Help appreciated.
-
-
- ***************************************************
- K-P Koljonen / Hippopotamus Design / iNSANE
- kp@direktor.voima.jkl.fi, kpkoljon@freenet.hut.fi
- http://direktor.voima.jkl.fi/~kp K-P@IRC
- ***************************************************
-
-
-